User`s guide

Use Your System 4
Agilent E6474A User’s Guide 97
3 Click the Detail button to show more information about the
device that was detected.
4 Click the Yes button to accept the configuration. Figure 41
shows an example.
Enabling the Devices
Note that the check box next to each device is checked,
indicating that the device is enabled for data collection. Phones,
receivers, and scanners are automatically enabled after you
NOTE
If you are sure which device is connected to the selected port, you can
reduce refresh time by using the Manual Refresh option. A second menu
is displayed showing the devices you are currently licensed to use. You can
then select the device that is connected to the selected port.
Figure 41 Single direct connect phone identified on computer COM port
NOTE
When using a dual serial port PCMCIA card (PC card) take a note of which
COM port is assigned to which device.