User`s guide

Use Your System 4
Agilent E6474A User’s Guide 95
Phone Connected to a Computer Serial Port
A typical System Setup view before the devices have been
identified is shown in Figure 40. The phone is connected to the
computer’s COM1 port.
NOTE
If you are uncertain about how COM ports are assigned and need
assistance in determining which COM port is assigned to each specific
device, refer to Important Information About the E6473B Agilent High
Speed Direct Connect Hub. The section entitled, “Understanding and
Organizing COM Ports” provides detailed information that will help you to
identify and set up COM ports.
This document is shipped with the E6473B system, and the latest version
is also available at http://www.agilent.com/cm/wireless/e6474/
download.shtml.