User`s guide

Use Your System 4
Agilent E6474A User’s Guide 93
Starting the Software
Detailed information about the software is available from the
online help. It is assumed that the software has already been
installed. If not, refer to “Installing the Agilent E6474A
Software" on page 23 for installation instructions.
Before you begin to collect or monitor data, you must:
• Start the application
• Create a plan file
• Identify and enable the devices
• Configure the devices and the display
• Save the configuration
To start the application
1 To start the application, click Start > Programs > Agilent
Wireless Solutions > E6474A > E6474A.
2 Press F5 to display the System Setup view.
3 Perform the procedure in “Identifying the Devices" on
page 94.
Creating Plan Files
An .spf file is a plan file that contains the system device
configuration, the properties settings for all of the devices, and
the views, as they have been configured and arranged in the
main window. Its name appears in the title bar of the main
window. You can create different .spf files with unique
characteristics for specific test routes.
• To create a new .spf file, click File > New. A new System
Setup view opens.
You can also open and modify an existing .spf plan file, saving it
with a different name.