User`s guide

82 Agilent E6474A User’s Guide
3 Set Up Your System
cable to be plugged into a Serial port of the computer for a
“direct connect” configuration (See “Computer Serial Port
Connections” on page 57.).
Direct Connect Hub Connection
1 Connect the phone interface cable(s) to the phone(s).
2 Connect the opposite end of the phone interface cable to the
(Phone 1) port of the Direct Connect Hub.
3 Connect the opposite end of the second phone interface cable
to the
(Phone 2) port of the Direct Connect Hub.
4 Connect the headsets (E6473-60017) to the headset
connectors of the Direct Connect Hub.
Computer Serial Port Connection
If your system is equipped with two or more phones and does
not include an E6473B High Speed Direct Connect Hub, install
the Dual Serial Port PCMCIA card per the manufacturer’s
instructions.
1 Connect the phone interface cable to the phone.
2 If you are using the extender cable (E6473-60042), connect it
to the phone interface cable.
3 Connect the 26 pin end of the 9-to-26 pin adapter
(E6473-60015) to the phone interface cable (or extender
cable).
4 Connect the 9 pin end of the adapter to the Serial port of the
computer.
CAUTION
To prevent damage to the Direct Connect Hub or phone, always power
the Direct Connect Hub off before connecting or disconnecting a
phone.
NOTE
Phone battery charging and audio monitoring are not supported with direct
connect phones.