User`s guide

76 Agilent E6474A User’s Guide
3 Set Up Your System
Cable Routing Within the Backpack
Refer to Figure 34 for cable routing details. Refer to Appendix
D, System Information, for antenna, phone, and headset cable
part numbers.
1 Route the receiver and GPS antenna cables through the two
openings in the cover.
2 Route the phone cables through the appropriate opening,
depending on where the phones will be attached.
3 Route the USB cable (E6473-60005) and headset cables
through the top opening.
Cable Routing Through the Shoulder Straps
Refer to Figure 35 for a cable routing example.
1 Route the USB cable (E6473-60005) through either shoulder
strap.
2 If the phones will be attached to the shoulder straps, route
the phone interface cables through either shoulder strap.
Figure 34 Inside the backpack