User`s guide

74 Agilent E6474A User’s Guide
3 Set Up Your System
The dual receiver backpack hub kit also supports a two-direct
connect hub (no receivers) configuration. To achieve this
configuration, you must purchase two Agilent High Speed Direct
Connect Hub (E6473B option 015), one dual receiver backpack
hub kit (E6473B-024), and one carry pack hub kit (E6473B
option 022). The carry pack hub kit is required for the portable
chassis and the battery kit, which would be used for the second
direct connect hub. Please note that the carry pack, itself, can
be strapped into the backpack.
Direct Connect Hub Chassis Assembly
The Direct Connect Hub and the battery are attached to a metal
chassis. Refer to Figure 32 and Figure 33 for Direct Connect
Hub and battery orientation.
NOTE
Please refer to Appendix D, “System Information", for antenna and phone
interface cable part numbers.
Figure 32 Data and power connections