User`s guide

Set Up Your System 3
Agilent E6474A User’s Guide 73
Using the Single-Receiver Backpack
1 Adjust the waist belt for a snug fit around your waist, then
remove it.
2 Feed the waist belt through the belt loops of the pack. The
black mesh should be on the outside.
3 Connect the two shoulder straps to the D-rings of the pack.
4 Mount the pack to your body, then connect the buckle of the
waist strap.
5 Adjust the shoulder straps.
6 Connect the chest strap to the D-rings of the shoulder straps.
7 Adjust all straps for a comfortable fit.
Portable Dual E645xx Receiver System
This section describes the cable connections for a system
equipped with two E645xx receivers. This configuration is
housed in the dual receiver back pack hub kit,
E6473B option 024. The backpack contains a removable
mounting platform to which the receivers and Direct Connect
Hub are attached.
Figure 31 Single receiver backpack (left side view)