User`s guide

Set Up Your System 3
Agilent E6474A User’s Guide 65
E746xx Scanner Antenna Connections
1 For a single band scanner, connect the antenna cable to the
antenna connector on the front panel.
2 For a dual band or PN scanner, connect the lower band RF
antenna cable to the lower antenna connector on the front
panel.
3 For a dual band or PN scanner, connect the upper band RF or
GPS antenna cable to the upper antenna connector on the
front panel.
Carry Pack Final Assembly
1 Route the antenna, phone, and computer cables through the
openings provided.
2 Close all open panels.
Figure 23 Peripheral connections