User`s guide

64 Agilent E6474A User’s Guide
3 Set Up Your System
E6473B High Speed Direct Connect Hub and E746xx Scanner
Connections
1 Open the rear cover of the pack, then connect the data/power
cable (E6473-60083) to the
RECEIVER port of the
Direct Connect Hub. See Figure 22.
2 Connect the opposite end of the cable to the SCANNER
port of the Scanner.
3 Connect the USB cable (E6473-60005) to the (USB
Upstream) port on the Direct Connect Hub front panel.
4 Connect the opposite end of the USB data cable to the USB
port of the computer.
5 If programmed, insert the software license key into the
(USB Downstream) port on the front panel. Otherwise, plug
the DB25 key into the parallel port of the computer.
6 Connect the phones and headsets as described under “Phone
Connections" on page 81. (See Figure 23 on page 65.)
Figure 22 Data and power connections