User`s guide

54 Agilent E6474A User’s Guide
3 Set Up Your System
3 Connect the opposite end of the cable to the RX LOOP OUT port
of Receiver # 2.
4 Connect the long Rx Loop cable (E7450-60002) to the RX LOOP
OUT port of Receiver # 1.
5 Connect the opposite end of the cable to the RX LOOP IN port
of Receiver # 2.
6 Connect the antenna cable for the receiver the RF INPUT. If
you have a cdmaOne or cdma2000 receiver, connect the free
end of the 1 PPS cable (86156-60004) to the
NAV/RTCM port.
Figure 16 Data and power connections