User`s guide

Set Up Your System 3
Agilent E6474A User’s Guide 51
E6473B High Speed Direct Connect Hub Connections
If your system includes two Direct Connect Hub units, see
“Connecting Two Direct Connect Hub-Systems" on page 55.
1 Connect the data/power cable (E6473-60006) to the
RECEIVER port on the rear panel.
2 Connect the Direct Connect Hub power cable (E6473-60084)
to the
PWR IN connector on the rear panel.
3 Connect the navigator data cable (E7484-60005) to the AUX
port on the rear panel.
Figure 14 Data and power connections