User`s guide

50 Agilent E6474A User’s Guide
3 Set Up Your System
1 Connect the opposite end of the USB cable (E6473-60010) to
the USB port of the computer.
2 If equipped, connect the power cable from the computer to
the 4-to-1 lighter socket adapter.
Direct Connect Hub with Receivers and Agilent Direct Connect
GPS/DR
A system with two E645xx receivers is shown in Figure 14. If
your system has only one receiver, disregard all connections
shown to Receiver 2.
NOTE
Refer to Appendix D, “System Information", for antenna and phone
interface cable part numbers.