User`s guide

Set Up Your System 3
Agilent E6474A User’s Guide 49
3 Connect the opposite end of the cable to the RX LOOP OUT port
of Receiver # 2.
4 Connect the long Rx Loop cable (E7450-60002) to the RX LOOP
OUT port of Receiver # 1.
5 Connect the opposite end of the cable to the RX LOOP IN port
of Receiver # 2.
6 Connect the antenna cable for the receiver the RF INPUT
connector.
7 If the receiver is equipped with the GPS option, connect the
GPS antenna to the GPS
ANTENNA connector of the receiver.
Computer Connections
Figure 13 Data and power connections
NOTE
When using the internal receiver GPS with multiple receivers, you must
use the GPS in the first receiver of the series.