User`s guide

48 Agilent E6474A User’s Guide
3 Set Up Your System
4 If the receiver is equipped with the GPS option, connect the
GPS antenna to the GPS antenna connector of the receiver.
See Figure 12.
Second E645xx Receiver Connections
1 Connect the power plug of the second receiver power cable
(E6473-60091) to the 9-34 VDC connector.
2 Connect the short Rx Loop cable (E7450-60001) to the RX
LOOP IN port of Receiver # 1. See Figure 13.
NOTE
For more information about connections for GPS options, see “Navigation
Options" on page 36.
Figure 12 Single receiver connections