User`s guide

Set Up Your System 3
Agilent E6474A User’s Guide 47
5 Connect the USB cable (E6473-60010) to the (USB
Upstream) port on the front panel.
6 If equipped, connect the phones and headsets as described
under “Phones" on page 55. See Figure 11.
Single E645xx Receiver Connections
Refer to Appendix D, “System Information,” starting on page
179 for antenna part numbers.
1 Connect the D-shell connector end of the data/power cable
(E6473-60006) to the
RS-232 port of the receiver.
2 Connect the power plug of the data/power cable to the 9-34
VDC connector of the receiver.
3 Connect the antenna cable for the receiver the RF INPUT
connector.
Figure 11 Peripheral connections