User`s guide

46 Agilent E6474A User’s Guide
3 Set Up Your System
E6473B High Speed Direct Connect Hub Connections
If your system includes two Direct Connect Hub units, see
“Connecting Two Direct Connect Hub-Systems" on page 55.
1 Connect the data/power cable (E6473-60006) to the
RECEIVER port on the rear panel.
2 Connect the main power cable (E6473-60003 or
E6473-60004) to the
PWR IN connector on the rear panel.
3 If equipped, connect the second receiver power cable
(E6473-60091) to the
AUX PWR OUT connector on the rear
panel.
4 If programmed, insert the software license key into the
(USB Downstream) port on the front panel. Otherwise, plug
the DB25 key into the parallel port of the computer.
Figure 10 Data and power connections