User`s guide

Set Up Your System 3
Agilent E6474A User’s Guide 43
E6473B High Speed Direct Connect Hub Connections
If your system includes two Direct Connect Hub units, see
“Connecting Two Direct Connect Hub-Systems" on page 55.
1 Connect the scanner data/power cable (E6473-60083) to
the
RECEIVER port on the rear panel. See Figure 8.
2 Connect the Direct Connect Hub power cable (E6473-60084)
to the
PWR IN connector on the rear panel.
3 Connect the navigator data cable (E7484-60005) to the
AUX port on the rear panel.
4 If programmed, insert the software license key into the
(USB Downstream) port on the front panel. Otherwise, plug
the DB25 key into the parallel port of the computer.
5 Connect the USB cable (E6473-60010) to the (USB
Upstream) port on the front panel.
6 Connect the phones and headsets as described under
“Phones" on page 55. See Figure 8.