User`s guide

Set Up Your System 3
Agilent E6474A User’s Guide 41
Computer Connections
1 Connect the opposite end of the USB cable (E6473-60010) to
the USB port of the computer.
2 If equipped, connect the power cable from the computer to
the 4-to-1 lighter socket adapter.
Garmin GPS Receiver Connections
If your system is equipped with a Garmin GPS receiver, follow
these steps:
1 Connect the interface cable to the receiver. See Figure 6.
2 Connect the D-shell connector of the cable to the AUX
port on the rear panel of the Direct Connect Hub. See
Figure 6.
3 Connect the power plug to the 4-to-1 lighter socket adapter.
Figure 6 Connect the GPS to the AUX connector