User`s guide

Set Up Your System 3
Agilent E6474A User’s Guide 37
Connecting the Speed Pulse
When connecting the Speed Pulse cable, the following wiring
scheme is used:
Figure 2 Setting the Gyro pin. If the unit is set on its right side, the pin is set at the alternat position.
CAUTION
The dead reckoning system is comprised of the Gyro and the Speed
Pulse (odometer) connection. The connection of the Speed Pulse cable
is vehicle-specific and should be performed by persons trained to do
such installations.
Color Connection
Red Speed Pulse (odometer)
Black Ground
White Backup (seldom used; not
necessary for proper
operation)
Shield