User`s guide

27
Agilent E6474A
User’s Guide
Agilent Technologies
3
Set Up Your System
What You’ll Find in this Chapter
Below you’ll find two tables to help you quickly locate the set up
information you want, one for in-vehicle systems and the other
for portable systems.
In-vehicle Systems Set Up - Quick Reference
NOTE
If you need to permanently install hardware components, such as a Direct
Connect Hub base plate, refer to “Direct Connect Hub Installation" on
page 210.
In-Vehicle System
Component(s) To setup hardware, see: To connect cables, see:
Direct connect hub with
scanner
“Mounting the Hub" on page 35 “Direct Connect Hub with Scanner" on page 38
“E6473B High Speed Direct Connect Hub
Connections" on page 38
“E746xx Scanner Connections" on page 40
“Computer Connections" on page 41
“Garmin GPS Receiver Connections" on page 41
Direct connect hub with
scanner and GPS/DR
Navigator
“Mounting the Hub and Scanner
or Receiver" on page 35
“Direct Connect Hub with Scanner and Agilent Direct
Connect GPS/DR" on page 42
“E6473B High Speed Direct Connect Hub
Connections" on page 38
“E746xx Scanner Connections" on page 40
“Communicating with the Agilent Direct Connect
GPS/DR" on page 45
“Computer Connections" on page 41