User`s guide

Install the Software 2
Agilent E6474A User’s Guide 23
Installing the Agilent E6474A Software
Before starting this procedure, verify that the computer’s
battery is fully charged. Refer to the computer manufacturer’s
documentation for details.
Uninstalling Existing Software
If you are uninstalling existing E6474A, Walkabout, or
VoicePrint software, follow these steps in the order they are
presented:
1 From the Start menu, choose Settings > Control Panel, and
then double-click Add/Remove Programs.
2 Select Agilent E6474A, then click Add/Remove, then click
Yes to start the uninstall process.
3 After the uninstall is complete, shut down, then restart the
computer. You can then install the new version of E6474A
software, as described below.
Installing New Software
The installation CD-ROM contains three separate applications:
E6474A software, License Manager, and Cellsite Editor. All
applications are automatically installed when you install
E6474A.
1 If present, remove the software license key from the parallel
or USB port of the computer.
2 Power up the computer.
3 Close any applications that are running.
4 Disable any anti-virus software that is running.
NOTE
It is recommended that you uninstall existing E6474A, Walkabout, or
VoicePrint software prior to installing a new release. In the event that you
are required to uninstall, a message box automatically appears during
installation to explain what you need to do. Refer to “Uninstalling Existing
Software” for basic uninstall instructions.