User`s guide

Permanent In-Vehicle Hardware Installation E
Agilent E6474A User’s Guide 211
Mounting the E645xx Receiver
If equipped, install the receiver’s mounting plate as follows:
1 Locate a flat surface of the vehicle to which the base plate
can be securely attached.
2 Mark the holes for the #10 mounting screws on the mounting
surface according to the hole pattern of the plate.
3 Drill the holes, using a 3/32” drill bit, or the metric
equivalent that accommodates the screw.
4 Attach the base plate to the vehicle, using the hardware
provided.
Attach the receiver(s) to the plate with the straps provided.
Figure 75 E645xx receiver mounting plate