User`s guide

166 Agilent E6474A User’s Guide
B GPS Connections for E74xx Systems
Phone, Receiver, and Model 400 or SV6
1 Connect the software license key to the PARALLEL port of the
computer.
2 Connect the serial port of the PC to the RS-232 port of the
Agilent E645x receiver using the RS-232 cable included with
the system.
Figure 65 Phone, E645xx receiver and model 400 or SV6 GPS
NOTE
The Trimble Placer SV6 Plus operates from 9 to 32 VDC (NO internal
battery backup). The red wire must be tied to the positive side of the power
supply. The black wire must be tied to the negative side of the power
supply. Optionally, the yellow wire may be tied to a backup power source,
such as a lithium battery (operates from 3.5 to 14 VDC).