Technical data

36 Agilent Mobile Voice MOS Test Application Getting Started Guide
2 Measuring Voice Quality
• Call Control Test - Call Initiator (refer to Figure 32)
a Auto Dial = YES
b Immediate Dial = YES
c Continuous Call = NO
d Call Duration = 200 or above
It is recommended to establish a call with the
minimum 200 seconds when running the Voice MOS
Test. This allows several MOS to be collected and
obtain meaningful measurement results for each call
session.
e Call Setup = 20
f Enter an appropriate call number
g Select the correct call COM port
h Set Auto Answer = No
i Voice MOS Test = Yes
j Channel - select the channel for the USB audio device
k Set the other properties for the Voice MOS Test
according to your network and test requirements.
Figure 32 Call Control Test Properties - Initiator
• Call Control Test - Call Receiver (refer to Figure 33)
a Auto Dial = No