Technical data

26 Agilent Mobile Voice MOS Test Application Getting Started Guide
1 Setting Up
The PESQ Key Entry dialog box appears.
Figure 19 Enabling ITU standard PESQ measurement
10 Enter the PESQ key and then click OK.
Figure 20 PESQ Key Entry dialog box
11 Click OK to close the Enable Features dialog box.
12 Exit the VQT application.
Setting up the USB Audio Module
The USB Audio Module needs to be configured to provide
the calibrated audio support for mobile voice quality testing.
The following settings should be made before any voice MOS
tests are run.
NOTE
Before setting up your USB Audio Module, follow the manufacturers
instructions for installing device drivers and configuring the hardware.