Technical data

Setting Up 1
Agilent Mobile Voice MOS Test Application Getting Started Guide 21
Setting up the software and license key (Mobile Van)
You need to install the software and set up the license key
for both the client PC in the mobile van. Each PC requires a
separate copy of the Mobile VQT Software.
Installing the VQT applications at the Mobile Van
The Agilent Mobile Voice MOS Test Software solution
consists of the VQT (including PESQ algorithm).
To install the applications:
NOTE
The 10/100 licenses is not used by the mobile van configuration. However,
the license still needs to be enabled as it is an integral part of the VQT
application, which is the same application used on the server (CO) side of
the network.
NOTE
To use the USB Audio Module and test mobiles you need to install the
E6474A Wireless Network Measurement Software. Refer to the E6474A
User’s Guide for more information on installation and configuration.
Do This Notes
1Insert the CD This CD contains several
applications.
2 Your system may have autostart or go to
the Start button, click Run and type D:\
setup (where D is your CD drive).
The following installation
dialog appears (see below).