Technical data

Setting Up 1
Agilent Mobile Voice MOS Test Application Getting Started Guide 17
The PESQ Key Entry dialog box appears (Figure 9).
Figure 9 Enabling ITU standard PESQ measurement
10 Enter the PESQ key and then click OK.
Figure 10 PESQ Key Entry dialog box
11 Click OK to close the Enable Features dialog box.
12 Exit the VQT application and proceed to the next stage of
the installation.
Re-installing PCI card drivers
Your office PC is supplied with a fully configured and
working PCI audio card. However the card or driver can be
damaged while in transit to your location. When your PC
starts the operating system checks all the hardware and
drivers. If there is an issue, the system will report “new
hardware found”. Follow this procedure to re- install the PCI
audio card driver.