Specifications

8
 if checked, the phone’s Tx power will not vary as the BTS transmit power decreases,
because the phone stops decoding the power control bit
 if unchecked, the phone operates normally
Sounder Mode
 if checked, after the first call is placed and ended, only Sync channel messages will
be received – no further calls can be placed or received
 if unchecked, the phone operates normally
Force Reverse Link Voice to Full Rate
 if checked, transmit vocoder rates are set to the full rate, regardless of the voice
activity
 if unchecked, the phone operates normally
Log mask
The E6474A system extracts measurement data from the mobile handset. Extraction of
the specific measurement type is controlled by a set of check boxes within the log mask
tab, cdma2000 log mask tab and enables tab within the CDMA Properties view for the
mobile phone.
The log mask tab enables the logging of the following items:
 AGC Power Control – power control messages
 Access Channel Message – all access channel signaling messages sent
 Reverse Channel Traffic Message – all reverse Traffic Channel signaling messages
sent
 Sync Channel Message – all Sync Channel Messages sent
 Paging Channel Message – all Paging Channel signaling messages received
 Forward Channel Traffic Message – all Forward Traffic Channel signaling messages
received
 Use Extended Log Mask Format check box. This option must be checked in order to
retrieve cdma2000 log mask items. This option also enables the streaming message
option of the phone. Keep this option checked while collecting data with any
cdma2000 phone or PC Card