Specifications

6
Phone Based Measurements
The E6474A software provides phone or PC Card based measurements for cdmaOne,
cdma2000 and 1xEV-DO handsets or wireless PC Cards and is fully backward compatible
with IS-95 handsets. The E6474A phone based measurements options provide 3 primary
elements:
 Call setup
 Phone measurements
 Layer 3 messaging
Call setup
Call setup is divided into two main pieces –dialing setup and log mask setup. The
appropriate control view for the dialing and log mask setup can be accessed by right-
clicking on the specific device within the System Setup view. This will bring up the CDMA
Properties view. For cdma20000 the CDMA Properties view has five tabs as follows:
Autodial Setup, Dip Switches, Log Mask, CDMA2000 Log Mask and Enables.
Autodial setup
The dialing setup is divided between the autodial setup tab view and the dip switches tab
view within the CDMA properties view. The autodial setup provides automated control of
the handset. The Autodial Setup view provides the functions listed below.
 AutoDial – enables automatic dialing
 Call Statistics – logs attempted calls, blocked calls, dropped calls
 Automatically Set PC Clock – automatically sets PC clock to GPS timer
 Immediate Dial – if a call is dropped, the next call will be placed after waiting for the
specified idle time
 Continuous Call – enable this check box to make one continuous call during a test --
to end the call, end the test
 Call Type pick list
- Default
- EVRC