Specifications

48
Custom View
Custom view gives the user flexibility to create customized views by selecting parameters
required and displaying them in a tabular format. Up to 40 parameters can be applied per
view and multiple views can be created and saved for reuse.
Alarms view
The Alarms view is used to configure alarms that are triggered by parameters received
during a test that meet user-defined criteria. Parameters collected as integer values or
messages, from connected phones, receivers or GPS navigation hardware, can be used to
initiate alarms; these parameters are selected using the Measurement Parameter view.
The user can choose any one or all of the following actions to occur on an alarm:
• A .WAV audio file can play
• A marker can be written to the database file, and displayed in the Route Map and
Time Chart views
• A pop-up message box can be displayed
• Measurements can be paused or stopped
Each alarm event is also tabulated on the Alarms view as it occurs. Fifty pictorial survey
markers are available to depict alarm events within the Chart and Route Map views.
Alarms require set-up prior to a database collection in order to enable survey markers
during playback.
The Alarms view enables the user to create simple or complex conditions to trigger an
alarm. The following are examples of how an alarm can be generated:
• Monitor a single parameter for a single set of criteria. When the criteria are met, an
alarm is generated.
• Monitor a single parameter and logically "AND" up to five sets of criteria. When all
sets of criteria are met, an alarm is generated.
• Monitor several parameters, each with a single set of criteria. Each parameter can
generate its own sound when the criteria are met.
• Monitor several parameters, each with multiple logically "ANDed" sets of criteria.