Specifications

46
Data recording
The following commands appear on the Log pull-down menu. The commands are also
available as buttons on the main tool bar.
Command Action
Replay Start replaying a data file.
Reverse Replay Play back a data file in reverse (2x to 7x).
Slow Replay Reduce the playback speed. (/2 to /7)
Fast Replay Increase the playback speed.
Fast Reverse Replay Increase the reverse playback speed (2x to 7x).
Slow Reverse Replay Reduce the reverse playback speed. (/2 to /7)
Start Live Mode Start displaying data. Data is not logged.
Start Logging Initiates a data recording.
Pause Pause data collection or replay.
Stop Stop data collection or replaying a data file.
Single Step Mode Pauses replay until Single Step is selected
Single Step Enables user to step through the database in
playback mode when Single Step Mode is activated
Note: All parameters enabled on the mobile or receiver at system setup will be recorded
during logging, not only those selected for display.
A summary of additional record and playback features is listed below:
• Pause/resume
• Survey markers and user notes -- Survey markers and user notes can be entered on
the route map during a data collection test.
• Automatically numbered survey markers -- When enabled, the software automatically
adds the following markers when logging:
11 Start of Test
12 Start of Data Collection
13 End of Data Collection
14 End of Test
15 Pause
16 Resume
• Playback of a database does not require a license key