Specifications

41
Adjacent channel desensitization
6
 -20 dBm typical
Adjacent channel rejection
7
 25 dB typical
• Accuracy for Korea PCS band receiver
200 kHz IF bandwidth
 ± 0.5 dB typical from –25dBm to –100 dBm
1.25 MHz IF bandwidth
 ± 0.5 dB typical from –25dBm to –100 dBm
Noise figure
 8 dB typical
Internally generated spurious, input referred
 -120 for 200 kHz IF Bandwidth
 -120 dBm for 1.25MHz IF Bandwidth
Adjacent channel desensitization
4
 -25 dBm typical
Adjacent channel rejection
8
 45 dB typical
Maximum safe input level
+10 dBm, 20V DC characteristic
1 dB compression point
3
-15 dBm characteristic
Input/Output
RF input 50W type-N
Connectors
Computer RS-232 (DB9) Male
GPS RS-232 (DB9) Male
Power DC power jack 100 mils, positive center
Misc
Operating temperature range
0 to 55 °C
5. Adjacent channel rejection applies to the 30 kHz IF filter and is defined as the suppression of interfering
signal +/-30 kHz from tuned signal.
6. Adjacent channel desensitization for IMT-2000 band receiver applies to the 5.0 MHz IF filter and is defined
as the 1 dB compression of tuned signal with interfering signal +/-1.25 MHz from tuned signal.
7. Adjacent channel rejection for IMT-2000 Band Receiver applies to the 1.25 MHz IF filter and is defined as
the suppression of interfering signal +/- 1.25 MHz from tuned signal.
8. Adjacent channel rejection for Korea band receiver applies to the 200 kHz IF filter and is defined as the
suppression of interfering signal +/- 200 kHz from tuned signal.