Specifications

 200 kHz (Korea PCS band (narrowband) only)

 30 kHz

Resolution bandwidth (CW power only)

Cellular band, PCS band, and Japan cellular band receivers

 8.36 kHz to 1 MHz (with 1.25MHz IF bandwidth)

 246 Hz to 28 kHz (with 30 kHz IF bandwidth)

IMT-2000 band receiver

 8.36 kHz to 1 MHz (with 1.25 MHz IF bandwidth)

 25.08 kHz to 2.85 MHz (with 5MHz IF bandwidth)

Korea PCS band receiver

 8.36 kHz to 1 MHz (with 1.25 MHz IF bandwidth)

 1.68 kHz to 190 kHz (with 200 kHz IF bandwidth)

Channel width (channel power only)

Cellular band receiver (E6452C)

 8.36 kHz to 25 MHz with 1.25 MHz IF bandwidth

 246 Hz to 25 MHz with 30 kHz IF bandwidth

PCS band receiver (E6450C)

 8.36 kHz to 60 MHz with 1.25 MHz IF bandwidth

 246 Hz to 60 MHz with 30 kHz IF bandwidth

IMT 2000 receiver (E6455C )

 8.36 kHz to 60 MHz (with 1.25 MHz IF bandwidth)

 100 kHz to 60 MHz (with 5.0 MHz IF bandwidth)

Japan cellular band receiver (E6457C)

 8.36 kHz to 38 MHz (with 1.25 MHz IF bandwidth)

 246 Hz to 38 MHz (with 5.0 MHz IF bandwidth)

Korea PCS band receiver (E6453C )

 8.36 kHz to 75 MHz (with 1.25 MHz IF bandwidth)

 1.68 kHz to 75 MHz (with 200 kHz IF bandwidth)

RF Receiver Hardware

There are five CDMA digital RF receiver options for the Agilent E6474A system:

 E6452C - cellular band receiver with internal GPS receiver

 E6453C - Korea PCS band receiver with internal GPS receiver

 E6455C - 2100 MHz IMT 2000 receiver with internal GPS receiver

 E6457C - Japan cellular band receiver with internal GPS receiver

 E6450C - PCS band receiver with internal GPS receiver

The Agilent E6474A system with CDMA option 111 or option 121 has the software

function for controlling the receivers. The system supports any combination of receivers,

up to a total of four. Using multiple receiver configurations can greatly improve drive test

efficiency for applications such as monitoring competitive networks. In multiple receiver

configurations the receivers communicate with each other via a high speed serial ring.

Communication with the PC is done via a single RS-232 link to one of the receivers in the