Specifications

21
 Fill Frame – number of received fill frames
 Blank Frame – number of received blank frames
 Null Frame – number of received null frames
 New Data Frame – total number of received new data frames
 20ms Frame – number of received Fundamental data frames
 Total Bytes – total number of received bytes
 RLP Erasures – number of radio link protocol erasures received
 Mux Erasures – number of multiplexer erasures received
 Avg Fwd Throughput – average forward through put in Kbps
 Inst Fwd Throughput – instantaneous forward throughput in Kbps
Transmitted Counts
 ReXmits Frame – number of transmitted retransmitted frames
 Idle Frame – number of transmitted idle frames
 New Data Frame – total number of transmitted new data frames
 20ms Frame – number of transmitted fundamental data frames
 Total Bytes – total number of transmitted bytes
 Avg Rev Throughput – average reverse through put in Kbps
 Inst Rev Throughput – instantaneous reverse throughput in Kbps
CDMA TA Graph
This view provides a graphic representation of the signals being tracked by the CDMA or
cdma2000 phones and is updated in real time.
CDMA RxTx Power View - Line graph displays
 Rx and Tx Power – this view displays the received power and transmitted power over
time. The Rx power trace is displayed in red and the Tx power trace is displayed in
cyan.
Both traces appear on the same graph.
 Rx and Tx Vocoder – this view displays the transmit and receive rate of the voice
encoder signal over time. Both traces appear on the same graph. The receive
vocoder rate is displayed in red and the transmit vocoder rate is displayed in cyan.
 Tx Gain Adjust – this view displays the Tx gain adjustment power levels during data
collection.
 CDMA Frame Erasure Rate – the FER view displays the calculated frame error rate