User`s guide

Chapter 3 87
Screen Reference
MANUAL TEST (Synchronous Mode)
3. Screen Reference
Screen" on page 88. If the response from the mobile takes too much time, the
message changes to “Time out error. Press [Abort].” Then, the measurement is
cancelled and the screen returns to the Stand-by screen.
In both cases, you cannot change the DC Power supply mode field, however, the
DC Power voltage field of the MS Call measuring screen can be changed for
making DC Current tests at Camp On. The dc current measurement result for a call
setup is shown under the test item table along with other mobile related
information but the dialed number is shown only in the case of MS Call.