User`s guide

74 Chapter 3
Screen Reference
AUTOMATIC TEST
o Return: Displays the initial screen with function modes.
Explanation
In the Pass/Fail detailed screen, the test item cells are filled with the conclusion of
either Pass or Fail. If some items are denoted to be skipped in the Test Sequence
screen or the DC Power field is set to Off, “----” is shown in those cells and the
corresponding steps in the test flow.
Procedure to Obtain Each Pass/Fail Detailed Screen
Use the following procedure to obtain each Pass/Fail detailed screen:
Step 1. Place the circular cursor at one of the Pass/Fail result cells of the Test Item table by
rotating the CURSOR CONTROL knob.
Step 2. Choose that test result cell by pressing the CURSOR CONTROL knob one time.
Step 3. Either a data list or a graph with a data list is displayed according to each test item.
Step 4. Repeat Step 1 to Step 3 to observe other Pass/Fail test results in the Test Item table.
Step 5. Press the Start softkey to execute a new test, or press the Return softkey to go to
the initial screen.