User`s guide

Chapter 3 69
Screen Reference
AUTOMATIC TEST
3. Screen Reference
Talk Measuring Screen
While the measurement is being done after pressing the Start softkey, either the
AUTOMATIC TEST: Measuring simple (Figure 3-9) or detailed screen (Figure
3-10) is displayed, depending on the previous setting of the Screen Simp/Detai
softkey. The following examples illustrate the screens testing up to the Talk step of
the test flow.
Figure 3-9 Talk Measuring Simplified Screen
Figure 3-10 Talk Measuring Detailed Screen
Softkey Menu
o Pass: Press this softkey if your voice is echoed back from the mobile with
good quality. This softkey is activated at the time of the Talk step and erased
if pressed.
o Fail: Press this softkey if your voice is echoed back from the mobile with
poor quality. This softkey is activated at the time of the Talk step and erased
if pressed.
o Screen Simp/Detai: Toggles between Simp
for simplified and Detai for
detailed to select one of the AUTOMATIC TEST: Measuring screens.
o Abort: Stops the measurement and returns to the Stand-by screen.