User`s guide

Chapter 3 59
Screen Reference
General Operation Guide
3. Screen Reference
Storing Two Numeric Values
For numeric input fields such as channel numbers, input/output levels and power
controls, you can store two numeric values using the memory softkey menus with
the following procedure:
Step 1. Move the cursor to one of the numeric input fields of channels, input/output levels,
or power controls.
Step 2. Upon selecting the field by pressing the CURSOR CONTROL knob, the softkey
menu shown in the following figure is activated. The two memory softkeys show
the values previously stored in the memories if any.
Step 3. Select a numeric value in the input filed with the CURSOR CONTROL knob.
Step 4. Press the Store Val to Memory softkey to reveal another softkey menu for
Memory1 and Memory2.
Step 5. Press either of the memory softkeys where you desire to store that value.
Step 6. The memory softkey menu returns to the state in Step 2 showing the value newly
stored.
Step 7. Press the CURSOR CONTROL knob to determine the value into the field and the
softkey menu returns to that of Step 1.