User`s guide

52 Chapter 3

Screen Reference

General Operation Guide

This section outlines how to operate the Test Set.

Front Panel Overview

The Test Set is designed for easy operation, flexibility, dual band mobile testing,

measurement speed, and so forth with a simple front panel.

Figure 3-1 Front Panel of Agilent E6392B GSM MS Test Set

1. The LCD screen is used to display all of the testing conditions and test results.

2. Five softkeys, adjacent to the softkey labels shown in the LCD screen, are

individually defined depending on each test mode and test sequence.

3. The CURSOR CONTROL knob basically has three major roles as follows:

• Moving the cursor: Rotating the CURSOR CONTROL knob moves the

blinking cursor from one input field to another either upward or downward,

right or left, depending on the input fields arrangement. Input fields are

highlighted. If a field is not highlighted, it is a read-only field.

• Selecting an entry for an input field: Pressing the CURSOR CONTROL

knob once at an input field causes the input field to blink.

When the field is blinking, the CURSOR CONTROL knob is used to view

the values defined for that input field by scrolling through the selections

(rotating the knob).

When the desired selection is shown in the field, pressing knob causes the

selected value to enter into that input field. The cursor can then be used to

move to another input field.

678