User`s guide

42 Chapter 2
Using Functions
Testing a Mobile with MANUAL TEST (Asynchronous mode)
Step 13. Press the Start softkey, and the next MANUAL TEST: Measuring screen is shown.
Step 14. While the RF Test step is blinking as above, you can select a test item by pressing
the CURSOR CONTROL knob to execute its test. Place the cursor at “Peak TX
Power, Burst Timing, Power Ramp” and press the CURSOR CONTROL knob, for
example, to obtain the next screen.
Step 15. Press the Abort softkey, to get other softkey menus.
a. Press the Trigger Sing/Cont softkey to change the trigger mode to Sing
(single)
and the Zoom Off/On softkey to change the zoom mode to On
.
b. Press the More (1 of 3) softkey to reveal the next softkey menu, and press Knob
MKR/Cursor to change the knob control to MKR
(marker).