User`s guide

22 Chapter 1
Preparing for Use
Preparation for Each Test
Preparation for Each Test
The following procedures need to be executed before starting each test.
System Requirement
The following equipment is required to construct a test system:
• The Agilent E6392B GSM MS Test Set
• An RF cable to connect RF signals from/to the mobile phone under test,
An RF antenna coupler to connect RF signals from/to the mobile phone under
test, or
A shield box (Agilent N4678A) to connect RF signals from/to the mobile under
test
• Universal DC Power Adapter (P/N: E6392-61001) and appropriate cables
between the adapter and the mobile phone under test (optional)
• A printer and a printer cable (optional)
Figure 1-3 Typical Test Setup for a Mobile Phone
Installing the Test SIM
Insert the test Subscriber Identity Module (SIM) in the mobile phone before
performing any test, because the Test Set will attempt to perform measurements
which are not generally permitted by normal SIMs.