User`s guide

190 Appendix B
Input Fields and Allowable Ranges
Table 0-1 Input Fields and Allowable Choices or Ranges
Radio Standard
Test Mode Test Item,
Parameter
GSM900/E-GSM DCS1800 PCS1900
Automatic Test,
Manual Test,
Spectrum Monitor,
Signal Generator
BCCH
(Frequency):
GSM: 1 to 124
(890.2 to 914.8 MHz),
E-GSM: 0 to 124
(890.0 to 914.8 MHz),
975 to 1023
(880.2 to 889.8 MHz)
512 to 885
(1710.2 to 1784.8 MHz)
512 to 810
(1850.2 to 1909.8 MHz)
TCH (Talk)
(Frequency):
GSM: 1 to 124
(890.2 to 914.8 MHz),
E-GSM: 0 to 124
(890.0 to 914.8 MHz),
975 to 1023
(880.2 to 889.8 MHz)
512 to 885
(1710.2 to 1784.8 MHz)
512 to 810
(1850.2 to 1909.8 MHz)
Procedure: Default [previous setting], User
Multi Band: OFF, DCS1800 OFF, GSM900, E-GSM OFF
DC Power: Off, On, Auto [only for Automatic Test]; 3.0 to 11.0 V in 0.1 V steps
Var ia ble:
a
TCH, DC Power
TCH 1 to 6
or
DCP 1 to 6
GSM: 1 to 124,
E-GSM: 0 to 124,
975 to 1023
512 to 885 512 to 810
3.0 to 11.0 V in 0.1 V steps
Manual Test PDTCH
(Frequency):
[GPRS mode]
GSM: 1 to 124
(890.2 to 914.8 MHz)
E-GSM: 0 to 124
(890.0 to 914.8 MHz),
975 to 1023
(880.2 to 889.8 MHz)
512 to 885
(1710.2 to 1784.8 MHz)
512 to 810
(1850.2 to 1909.8 MHz)
Signal:
SYNC mode
ASYNC mode
GPRS mode
Burst [fixed]
Burst, CW
Burst [fixed]
Timing ADV:
[SYNC and GPRS
modes]
0 to 63 bits
PWR CNTL: 2: +39 dBm to
19: +5 dBm
29: +36 dBm to
15: 0 dBm
30: +33 dBm to
15: 0 dBm
BS Level: −110.0 to −50.0 dBm
Slot Config:
[GPRS mode]
Downlink 1 × Uplink 1, or
Downlink 2 × Uplink 1
Measured Slot:
[GPRS mode]
4 (fourth)