User`s guide

Chapter 3 147
Screen Reference
CONFIGURATION
3. Screen Reference
Network Config
Specifies the network parameters. Setting these parameter is
required when you test a phone using a user SIM instead of a test
SIM or when you want to test network capabilities.
o MCC: Accepts an entry for Mobile Country Code. The
allowable range is from 0 to 999.
o MNC: Accepts an entry for Mobile Network Code. The
allowable range is from 0 to 99.
o NCC: Accepts an entry for Network Color Code. The
allowable range is from 0 to 7.
o LAC: Accepts an entry for Location Area Code. The
allowable range is from 0 to 65535.
o BS_PA: Accepts an entry for the number of multiframes
between two transmissions of the same paging message
(BS_PA_MFRMS). The allowable range is from 2 to 9.
Date/Time
a
Specifies the current date and time with the following formats:
o YYYY: Accepts an entry for the year. The allowable
range is from 1990 to 2089.
o MM: Accepts an entry for the month. The allowable
range is from 01 to 12.
o DD: Accepts an entry for the date. The allowable range is
from 01 to 31.
o HH: Accepts an entry for the hour. The allowable range is
from 00 to 23.
o MM: Accepts an entry for the minute. The allowable
range is from 00 to 59.
Firmware
Shows the current firmware revision name stored in the Test Set.
Update
Toggles between On (enable to update) and Off (disable to update).
If On is selected, refer to "How to Update the Firmware" on page
165.
New Firmware
When the Update: field is set to On, shows the new firmware
revision name stored in the firmware update card.
a. The variable increment softkey is activated. Refer to "Variable Incre-
ment Softkey" on page 60.
Input Field Description