User`s guide

Chapter 3 127
Screen Reference
MANUAL TEST (GPRS Mode)
3. Screen Reference
Figure 3-47 Aborted: Peak TX Power/Power vs Time Screen
Figure 3-48 Aborted: Peak TX Power/Power vs Time Zoomed Screen
Softkey Menu 1
o Start: Begins a new measurement cycle with either single or continuous
trigger mode.
o Trigger Sing/Cont: Toggles the trigger mode between Sing
for single and
Cont
for continuous modes. In the continuous mode, this softkey is
highlighted blinking until the Abort softkey is pressed. In the single mode,
this softkey is highlighted for one measurement cycle and the marker
function is available with the Knob MKR/Cursor softkey.
o Zoom Off/On: Toggles the zooming function between Off and On. If On is
selected, the rising edge, from −8 bit to 0 bit, and trailing edge, between bits
147 and 155, of the Power Ramp waveforms are expanded to observe the
detailed results as shown in Figure 3-48.
o More (1 of 3): Displays softkey menu 2.
o Return: Returns to the initial Measuring screen as shown in Figure 3-45.
Softkey Menu 2
o Knob MKR/Cursor: Toggles the knob function of CURSOR CONTROL
between Cursor
and MKR for marker control.