User`s guide

120 Chapter 3
Screen Reference
MANUAL TEST (GPRS Mode)
Screen Fields
The following input fields of test parameters need to be set for a new test:
Input Field Description
Procedure
Displays a list of files that are on an SRAM memory card.
If an SRAM memory card containing setup files is used, a list of
those file names is shown in this field for selection. If there are no
files on the card, this field remains blank.
Radio Standard
Selects either GSM900, E-GSM, DCS1800, or PCS1900.
Multi Band
Selects another band in addition to one in Radio Standard for
testing dual band mobile phones. The allowable combinations of
radio standards are as follows:
Radio Standard: Multi Band:
GSM900 OFF, DCS1800
E-GSM OFF, DCS1800
DCS1800 OFF, GSM900, E-GSM
PCS1900 OFF
BCCH
a
Specifies the broadcast control channel. The frequency
corresponding to the channel accompanies. The allowable range is
as follows:
GSM900: 1 to 124
E-GSM: 0 to 124, and 975 to 1023
DCS1800: 512 to 885
PCS1900: 512 to 810
PWR CNTL
Specifies one of the factors defined for Power Control Levels
according to the Radio Standard. The allowable factor ranges are
as follows:
GSM900 and E-GSM: 2 (+39 dBm) to 19 (+5 dBm)
DCS1800: 29 (+36 dBm) to 31 (+32 dBm), and 0 (+30
dBm) to 15 (+0 dBm)
PCS1900: 30 (+33 dBm) to 31 (+32 dBm), and 0 (+30
dBm) to 15 (+0 dBm)
PDTCH
a
Accepts a value for packet data traffic channel. The frequency
corresponding to the channel accompanies. The allowable range is
as follows:
GSM900: 1 to 124
E-GSM: 0 to 124, and 975 to 1023
DCS1800: 512 to 885
PCS1900: 512 to 810