User`s guide

Chapter 3 119
Screen Reference
MANUAL TEST (GPRS Mode)
3. Screen Reference
Stand-by Screen
If GPRS is selected in the Mode Sync/Async/GPRS softkey, the following
Stand-by screen is displayed. The input fields for Slot Config, Measured Slot, and
Sensitivity are additionally available for GPRS measurements. Pressing the Start
softkey activates the attaching process to the mobile under test.
Figure 3-43 Stand-by Screen
Softkey Menu
o Mode Sync/Async/GPRS: Select either Sync
for synchronous, Async for
asynchronous, or GPRS for general packet radio service mode. This softkey
is available only for Test Sets equipped with Option 002 and Option 040.
o Start: Begins an attaching process through the idle state.
o Return: Displays the initial screen with function modes.