User`s guide

Chapter 3 113
Screen Reference
MANUAL TEST (Asynchronous Mode)
3. Screen Reference
Measuring: DC Current
The test data for the DC Current is displayed as shown in Figure 3-40. As this
measurement is asynchronously made, the test result does not show Camp On nor
Talk.
NOTE DC current can be measured only when the DC Power field is set to On and power
is supplied from the Test Set to the mobile under test.
Figure 3-40 Measuring: DC Current with Asynchronous Mode
Softkey Menu 1
o Start: Begins a new test.
o Trigger Sing/Cont: Toggles the trigger mode between Sing
for single and
Cont
for continuous modes. In the continuous mode, this softkey is
highlighted blinking until the Abort softkey is pressed. In the single mode,
this softkey is highlighted for one measurement cycle.
o More (1 of 2): Displays softkey menu 2.
o Return: Returns to the initial Measuring screen as shown in Figure 3-35.
Softkey Menu 2
o Print: Allows you to print a hardcopy of a graphic image from the screen.
o More (2 of 2): Returns to softkey menu 1.
o Return: Returns to the initial Measuring screen as shown in Figure 3-35.