User`s guide

Chapter 3 99
Screen Reference
MANUAL TEST (Synchronous Mode)
3. Screen Reference
o Trigger Sing/Cont: Toggles the trigger mode between Sing for single and
Cont
for continuous modes. In the continuous mode, this softkey is
highlighted blinking until the Abort softkey is pressed. In the single mode,
this softkey is highlighted for one measurement cycle and the marker
function is available with the Knob MKR/Cursor softkey.
o More (1 of 3): Displays softkey menu 2.
o Return: Returns to the Talk/RF Test Measuring screen.
Softkey Menu 2
o Knob MKR/Cursor: Toggles the function of the CURSOR CONTROL knob
between Cursor
and MKR for marker control.
o Marker Coars/Fine: Toggles the marker control between Coars
for coarse
and Fine
to move the marker with 10 dots (coarse) or 1 dot (fine) resolution.
The marker readouts for the frequency and amplitude are available at any
point of the measured trace.
o More (2 of 3): Displays softkey menu 3.
o Return: Returns to the Talk/RF Test Measuring screen.
Softkey Menu 3
o Print: Allows you to print a hardcopy of a graphic image from the screen.
o More (3 of 3): Returns to softkey menu 1.
o Return: Returns to the Talk/RF Test Measuring screen.