Specifications

vii
In this Book Throughout this guide the term "Test Set" is used to denote the Agilent E6392B.
This guide describes how to program the Agilent E6392B GSM MS Test Set. It is
recommended to refer to the User’s Guide when the detailed operational
information is required in addition to this guide.
This guide contains the following information on the Test Set:
Chapter 1, "Preparing for Use"
This chapter describes how to set up an automated test system with the Test Set.
Chapter 2, "Programming Command Guidelines"
This chapter describes the rules and guidelines for using the remote programming com-
mands via the RS-232C serial port interface.
Chapter 3, "Programming Command Reference"
This chapter provides a brief description of the syntax for each programming command.
Chapter 4, "Programming Command Cross Reference"
This chapter provides cross reference tables for the softkeys, test parameters, and other
test items, and their corresponding syntax.
Chapter 5, "Example Programs"
This chapter includes basic test programs for using the Test Set to test mobile phones.
Appendix A, “Syntax Diagrams,”
This appendix shows a syntax diagram for each subsystem or command group.
Appendix B, “Command Difference between E6392A & E6392B,”
This appendix contains a table to show the command differences between the Agilent
E6392A and E6392B.