Specifications

48 Chapter 3
Programming Command Reference
CONFigure Subsystem
This command specifies the channel number of Broadcast Control Channel
(BCCH) for each radio standard set by the Radio Format command. The allowable
range and preset values are as follows:
BCCH Frequency
CONFigure:SEQuence:BCCH:FREQuency
<real> [HZ|KHZ|MHZ|MAHZ]
CONFigure:SEQuence:BCCH:FREQuency?
This command specifies the frequency of Broadcast Control Channel (BCCH) for
each radio standard set by the Radio Format command. The allowable range and
preset values are as follows:
Burst Timing Test
CONFigure:SEQuence:BTIMing <int>
CONFigure:SEQuence:BTIMing?
This command defines whether or not to include Burst Timing tests in the test
sequence for the six measurements. <int> is a binary coded decimal ranging from 0
to 63 as follows:
bit 0 (1): For testing TCH1 or DCP1
bit 1 (2): For testing TCH2 or DCP2
bit 2 (4): For testing TCH3 or DCP3
bit 3 (8): For testing TCH4 or DCP4
bit 4 (16): For testing TCH5 or DCP5
bit 5 (32): For testing TCH6 or DCP6
RFORmat Allowable Range Preset Value
GSM900 1 to 124 20
E-GSM 0 to 124, 975 to 1023 20
DCS1800 512 to 885 698
PCS1900 512 to 810 698
RFORmat Allowable Range [Hz] Preset Value [Hz]
GSM900 890200000 to 914800000 890200000
E-GSM 880200000 to 914800000 890200000
DCS1800 1710200000 to 1784800000 1710200000
PCS1900 1850200000 to 1909800000 1850200000